B500A/B500B/B500C Rebar Description
Rebar is a common kind of steel in construction engineering, which is mainly used to strengthen concrete structures and improve the bearing capacity and seismic performance of buildings. The yield strength of B500 rebar reaches 500MPa, with high tensile strength and compressive strength. While meeting the strength requirements, B500 steel bar has good ductility and toughness, which can ensure that the building has good plastic deformation and energy dissipation capacity during the stress process. Lastly, compared with traditional steel bars, the high strength of B500 rebars allows buildings to reduce the use of steel bars, reduce construction costs, and reduce environmental impact.
| Type | B500A | B500B | B500C |
| Area | Smooth, Pitted, Ribbed | Dents, Ribs | Ribbed |
| Delivery Form | Coil, Bar, Spot Welding Steel Mesh, Lattice Beam | Coil, Bar, Spot Welding Steel Mesh | |
| Nominal Center Linemm | 4-16 | 6-50 | 6-50 |
| Min. Flow Rate/Yield Limit Re(Mpa) | 500 | 500 | 500 Re,Actual value/Re,Nominal value<1.25 |
| Min.Rm/Re Ratio | 1.05a | 1.05 | 1.15c；<1.35 |
| Min. Maximum Load Elongation Agt% | 3.0a,b | 5.0b | 7.5B, c |
| Min. Fatigue Strength 2σad(Mpa) | 100 | d≤ 28mm:175 d>28mm:145 |
d≤ 28mm:175 d>28mm:145 |
| Tolerance Nominal Centerline % | /-4.5 | /-4.5 | /-4.5 |
| Chemical Composition % | C<0.22 Ceq<0.50 |
C<0.22 Ceq<0.50 |
C<0.22 Ceq<0.50 |
Scope of Application
Widely used in houses, bridges, roads, especially railways and other civil engineering.
